FT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
Manufacturer: FT3 012₴
In stock < 1000 pcs.
- Ви не можете додати ще "Док-станція для FT VRX 1.2–7.2GHz" до кошика. Переглянути кошик
- Ви не можете додати ще "Док-станція для FT VRX 1.2–7.2GHz" до кошика. Переглянути кошик
- Ви не можете додати ще "Патч-антена відеозв’язку FT 2.7–2.9GHz 21dBi RHCP" до кошика. Переглянути кошик
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 2 922₴ |
| From 100 to 999 | 2 861₴ |
Product description
The FT ESC 75A 4-in-1 speed controller combines 4 channels with a continuous current of up to 75A each and is designed for a 3–6S battery power supply. This configuration allows the use of a single board to control four motors, simplifying the layout of the power section.
The 75A ESC operates on an 8-bit EFM8BB21 MCU with Bluejay firmware. It supports control via PWM, DShot 300, and DShot 600 protocols. The controller features a built-in analog current sensor to monitor the power system load; however, telemetry transmission is not supported in this model.
The board is built on a 6-layer PCB with 3oz copper. Mounting holes of 30.5 × 30.5 mm for M3 hardware simplify installation into the frame. Dimensions are 74 × 85 mm.
Wiring Diagram
Package Contents
User Manual
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Channels: 4
- Direct Current: 75A × 4
- Peak Current: 80A (10 sec)
- Input Voltage: 3–6S (12.6–25.2 V)
- Output Voltage: VBAT
- Microcontroller (MCU): 8-bit EFM8BB21
- Firmware: BLS / Bluejay
- Protocols: PWM / DShot 300 / 600
- Current Sensor: Built-in
- Telemetry: None
- PCB: 6-layer, 3oz copper
- MOSFET: 60V / 0.9mΩ
- Capacitors: 2 × 680µF / 35V (external)
- TVS Protection: 1 × 1500W
- BEC: 5V / 3A, 12V / 2A
- Cooling: Passive
- Motor Connection: MR30 AMASS connectors (solderless)
- Mounting: 30.5 × 30.5 mm (M3)
- Dimensions: 74 × 85 mm
- Weight: 40 g
This product is often purchased with
-
4 588₴ Add to cartFT Li-ion Battery 6S2P 10000mAh 21.6V XT60
A 21.6V 10000mAh battery for 7-9" drones and UGVs. It delivers a 60A continuous current without significant voltage sag, reaches a peak current of 180A, and is equipped with a 2-pin XT60 connector. Comes with factory-balanced cells. -
1 202₴ Add to cartKHARAK 8” 350mm Carbon Fiber FPV Drone Frame
KHARAK 350mm carbon fiber frame for 8-inch FPV drone builds. Features durable 6mm thick carbon arms and a stack mounting pattern for 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a complete mounting kit for camera and video transmitter. -
449₴ Add to cartPropeller Set for 8″ FPV FT 8x6x3 2CW+2CCW
8-inch tri-blade glass-reinforced polyamide propellers for FPV drones. The 6″ pitch provides thrust and stability. Mounting hole: M5, weight: 13 g. The set includes 4 pieces: 2 CW and 2 CCW. -
944₴ Add to cartBrushless Motor for FPV Drone FT 2812 1100KV 6S
The FT 2812 1100KV motor, featuring a Ø33.3 × 36 mm rotor and a maximum power of up to 1361.1 W, is designed for drones with 6–8 inch propellers and 6S power. It is perfectly suited for 7–8" heavy-lift FPV and long-range drones. The motor provides sufficient torque for lifting payloads, while the moderate KV rating prevents overheating when using… -
1 451₴ Add to cartBrushless Motor for FPV Drone FT 3115 800KV 6S–8S
The FT 3115 800KV motor, featuring a Ø37.5 × 41 mm rotor and a peak power of up to 1724.6 W, is designed for builds with 9–10 inch propellers powered by 6S–8S batteries. The large stator provides high torque for lifting heavy payloads, while the low KV rating ensures energy efficiency and prevents overheating on 10" FPV setups, long-range builds,… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
