Description
The 6S2P 10000mAh (XT60) Li-ion battery with a nominal voltage of 21.6V is a reliable, high-capacity power source designed for 7-9″ mid-range drones, robotic platforms, and ground control stations.
The 6S2P configuration (6 cells in series, 2 in parallel) provides a nominal voltage of 21.6V and a capacity of 10000mAh. It features a maximum discharge current of up to 180A.
This battery is designed to power high-draw components: motors, ESCs, video transmitters (VTX), and other onboard electronics.
It can be mounted on 5-15 inch UAVs, small to medium-sized robotic platforms, and is also used to power equipment on ground control stations.
The use of an XT60 connector on this Li-ion battery ensures compatibility with most modern FPV systems. The included balance lead allows for charging via both multi-functional “smart” chargers and standard balance chargers.
This type of battery delivers a consistent rated current without severe voltage sag. It stands out for its stable performance under load and high resistance to overheating.
Key Advantages:
high capacity (10000mAh) combined with a compact footprint and a weight of 900 g;
lasts up to 40% longer than Li-Po batteries of the same capacity due to a higher recharge cycle life;
thanks to the stable cathode chemistry and protective cell layer, the battery is protected from overheating and performs reliably in all conditions;
equipped with a standard XT60 connector for quick plugging without the risk of reverse polarity.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion (thermally controlled, factory balanced)
- Capacity: 10000mAh (10Ah)
- Configuration: 6S2P
- Nominal Voltage: 21.6V
- Maximum Voltage: 25.2V
- Connector: XT60
- Max Charge Current: 20A (2C)
- Max Discharge Current: 220A (22C)
- Output Current: optimized for medium loads
- Protection: factory cell balancing, heat-resistant wrap
- Weight: ~0.9 kg
FT Li-ion Battery 6S2P 10000mAh 21.6V XT60
A 21.6V 10000mAh battery for 7-9″ drones and UGVs. It delivers a 60A continuous current without significant voltage sag, reaches a peak current of 180A, and is equipped with a 2-pin XT60 connector. Comes with factory-balanced cells.
Manufacturer: FT4 588₴
In stock > 1000 pcs.
Description
The 6S2P 10000mAh (XT60) Li-ion battery with a nominal voltage of 21.6V is a reliable, high-capacity power source designed for 7-9″ mid-range drones, robotic platforms, and ground control stations.
The 6S2P configuration (6 cells in series, 2 in parallel) provides a nominal voltage of 21.6V and a capacity of 10000mAh. It features a maximum discharge current of up to 180A.
This battery is designed to power high-draw components: motors, ESCs, video transmitters (VTX), and other onboard electronics.
It can be mounted on 5-15 inch UAVs, small to medium-sized robotic platforms, and is also used to power equipment on ground control stations.
The use of an XT60 connector on this Li-ion battery ensures compatibility with most modern FPV systems. The included balance lead allows for charging via both multi-functional “smart” chargers and standard balance chargers.
This type of battery delivers a consistent rated current without severe voltage sag. It stands out for its stable performance under load and high resistance to overheating.
Key Advantages:
high capacity (10000mAh) combined with a compact footprint and a weight of 900 g;
lasts up to 40% longer than Li-Po batteries of the same capacity due to a higher recharge cycle life;
thanks to the stable cathode chemistry and protective cell layer, the battery is protected from overheating and performs reliably in all conditions;
equipped with a standard XT60 connector for quick plugging without the risk of reverse polarity.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion (thermally controlled, factory balanced)
- Capacity: 10000mAh (10Ah)
- Configuration: 6S2P
- Nominal Voltage: 21.6V
- Maximum Voltage: 25.2V
- Connector: XT60
- Max Charge Current: 20A (2C)
- Max Discharge Current: 220A (22C)
- Output Current: optimized for medium loads
- Protection: factory cell balancing, heat-resistant wrap
- Weight: ~0.9 kg
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 4 450₴ |
| From 100 to 999 | 4 359₴ |
This product is often purchased with
-
1 148₴ Add to cartKHARAK 7” 320mm Carbon Fiber FPV Drone Frame
The KHARAK 320mm carbon fiber frame is designed for 7-inch FPV drone builds. The construction features durable 6mm thick carbon arms. The frame is compatible with flight stacks supporting 30.5 × 30.5 mm and 20 × 20 mm mounting patterns. -
944₴ Add to cartBrushless Motor for FPV Drone FT 2812 1900KV 6S
The FT 2812 1900KV motor, featuring a Ø33.3 × 36 mm rotor and a peak power of up to 2265.8 W, is designed for builds with 7–8 inch propellers on 6S power. The tall stator provides the necessary torque, while the 1900KV rating ensures maximum speed and instant acceleration. The motor is perfectly suited for specialized 7" FPV setups, high-speed… -
892₴ Add to cartBrushless Motor for FPV Drone FT 2807 1300KV 6S–8S
The FT 2807 1300KV motor, measuring Ø33.3 × 32 mm with a peak power of up to 1600 W, is designed for 7-inch builds powered by 6S–8S batteries. Thanks to the perfect balance between high torque and moderate current consumption, it is an optimal choice for 7" FPV drones with a takeoff weight of up to 3 kg, as well… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware.
