FT PDB HEX 2–12S 264 A Power Distribution Board
The FT PDB HEX 2–12S 264 A power distribution board is a device supporting 6 motors, designed for a total continuous current of 140A and a peak of up to 264A per channel. Built-in 5V, 9V, and 12V BECs at 5A each ensure reliable power for peripherals. Mounting holes for M3 dampeners with 20 × 20 and 30.5 × 30.5 mm patterns simplify installation on most frames.
Manufacturer: FT1 050₴
In stock < 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 1 019₴ |
| From 100 to 999 | 998₴ |
Product description
The FT PDB HEX 2–12S 264 A is a power distribution board for multirotor configurations supporting up to 6 motors. The PDB HEX operates with 2–12S batteries in the 6–60V range, and its power outputs deliver direct battery voltage (VBAT). The allowable continuous current per channel is 140A, with a peak of up to 264A. These specifications make it an optimal solution for installation in powerful quadcopters and hexacopters with motor control via individual ESCs.
To power peripheral electronics, the PDB 2–12S 264A is equipped with three BECs: 5V / 5A, 9V / 5A, and 12V / 5A. A built-in current sensor is used to measure the power system’s consumption. A voltage divider with a 1K:20K ratio provides input voltage monitoring. Thus, the board combines V-BATT distribution, the generation of stabilized voltage for peripherals, and the monitoring of essential power parameters.
One of the features of this model is its compact size and multiple mounting options. Standard mounting holes for M3 dampeners with 20 × 20 and 30.5 × 30.5 mm patterns simplify installation on compatible frames. The base is made of Heavy Copper FR-4 PCB, and the board’s dimensions are only 40 × 49 × 6 mm with a weight of 12 g. Thanks to such compact dimensions, the FT Power Distribution Board HEX does not require much space in the power section of the system.
Switching diagram:
Package contents:
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Motor Support: 6 (S1–S6)
- Input Voltage: 2–12S (6–60V)
- Output Voltage: VBAT
- Continuous Current: 140A
- Peak Current: 264A
- BEC Outputs: 5V / 5A, 9V / 5A, 12V / 5A
- Current Sensor: Built-in
- Telemetry: Supported
- ESC Power Connectors: Through-hole solder pads
- Power Contacts: BAT, GND
- Voltage Divider: 1K:20K
- Operating Temperature: -20°C to +55°C
- Board Material: Heavy Copper FR-4 PCB
- Mounting Holes: 20 × 20 mm / 30.5 × 30.5 mm (M3)
- Dimensions: 40 × 49 × 6 mm
- Weight: 12 g
This product is often purchased with
-
7 553₴ Add to cartHeavy Line F613 13” Carbon Fiber FPV Drone Frame
Heavy Line F613 carbon fiber frame designed for hexacopters with 13-inch propellers. The 6-arm platform features 10mm pressed carbon fiber arms. The mounting base supports 30.5 × 30.5 mm and 20 × 20 mm stack standards. Includes a complete mounting kit for camera and video transmitter. -
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT150
A high-capacity 6S3P 15000mAh 21.6V XT150 Li-ion battery for heavy-lift copters, high-speed drones, heavy UGVs, and power-hungry stations. The XT150 connector eliminates current load restrictions, delivering up to 165A continuous and 300A burst current without overheating or melting the contacts. -
1 881₴ Add to cartBrushless Motor for FPV Drone FT 4220 400KV 6S–8S
The FT 4220 400KV motor, featuring a Ø49.5 × 58 mm rotor and a peak power of up to 2186.7 W, is designed for builds with 15–17 inch propellers powered by 6S–8S batteries. Thanks to its massive torque and high energy efficiency, it is perfectly suited for heavy-lift quadcopters, agricultural drones, aerial photography platforms, and long-range drones requiring extended hover… -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
5 282₴ Add to cartFT ESC 75A 6-in-1 6-10S (32-bit) Speed Controller
The FT ESC 75A 6-in-1 speed controller is designed for hexacopters and powerful FPV platforms with a 6–10S power supply. Each of the 6 channels is rated for a continuous current of up to 75A. The device is powered by a 32-bit ARM microcontroller running at 120 MHz.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
