FT Li-ion Battery 6S3P 15000mAh 21.6V XT150
A high-capacity 6S3P 15000mAh 21.6V XT150 Li-ion battery for heavy-lift copters, high-speed drones, heavy UGVs, and power-hungry stations. The XT150 connector eliminates current load restrictions, delivering up to 165A continuous and 300A burst current without overheating or melting the contacts.
Manufacturer: FT6 224₴
In stock < 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 6 037₴ |
| From 100 to 999 | 5 913₴ |
Product description
The 6S3P XT150 15000mAh Li-ion battery is a high-capacity, high-discharge power source engineered for sustained high current draw and peak loads. It is ideal for heavy-lift FPV drones, high-speed copters, industrial drones, heavy robotic platforms, mobile stations, and power modules.
The 6S3P configuration (6 cells in series, 3 in parallel) provides a nominal voltage of 21.6V and a capacity of 15000mAh. This FPV Li-ion battery features a heat-resistant shrink wrap and is fully ready for use out of the box thanks to factory cell balancing.
This 6S Li-ion battery is designed to power ultra-high-draw unmanned systems: 18–21 inch quadcopters, hexacopters, octocopters with a high takeoff weight, high-speed drones, and heavy UGVs. It delivers high discharge rates without voltage sag during peak startup loads and high initial torque demands.
The use of an industrial-grade connector on the 6S3P batteries reduces the power line contact resistance to 0.15–0.20 mOhm, which is nearly half that of an XT90 connector. The connector can withstand peak current loads of up to 330A, allowing you to utilize the full power of the high-discharge FT INR 21700 cells.
Key Advantages:
6S3P packs are perfect for powering power-hungry UAVs;
the XT150 connector ensures stable operation at high currents with minimal contact resistance losses;
soft-pack design with protective electrical insulation cardboard and heat-shrink wrap.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion (thermally controlled, stable chemistry)
- Capacity: 15000mAh (15Ah)
- Configuration: 6S3P
- Nominal Voltage: 21.6V
- Maximum Voltage: 25.2V
- Connector: XT150
- Max Charge Current: 30A (2C)
- Max Discharge Current: up to 240A (10–20C)
- Output Current: designed for medium to high loads
- Protection: factory cell balancing, heat-resistant wrap
- Weight: ~1.8 kg
This product is often purchased with
-
7 553₴ Add to cartHeavy Line F613 13” Carbon Fiber FPV Drone Frame
Heavy Line F613 carbon fiber frame designed for hexacopters with 13-inch propellers. The 6-arm platform features 10mm pressed carbon fiber arms. The mounting base supports 30.5 × 30.5 mm and 20 × 20 mm stack standards. Includes a complete mounting kit for camera and video transmitter. -
6 997₴ Add to cartHeavy Line F418 18” Carbon Fiber FPV Drone Frame
Heavy Line F418 carbon fiber frame designed for 18–18.5 inch FPV drone propellers. Features 10mm thick high-density carbon fiber arms. The stack mounting base supports 30.5 × 30.5 mm and 20 × 20 mm standards. Comes complete with camera and video transmitter mounting kit. -
1 050₴ Add to cartFT PDB HEX 2–12S 264 A Power Distribution Board
The FT PDB HEX 2–12S 264 A power distribution board is a device supporting 6 motors, designed for a total continuous current of 140A and a peak of up to 264A per channel. Built-in 5V, 9V, and 12V BECs at 5A each ensure reliable power for peripherals. Mounting holes for M3 dampeners with 20 × 20 and 30.5 × 30.5… -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
5 282₴ Add to cartFT ESC 75A 6-in-1 6-10S (32-bit) Speed Controller
The FT ESC 75A 6-in-1 speed controller is designed for hexacopters and powerful FPV platforms with a 6–10S power supply. Each of the 6 channels is rated for a continuous current of up to 75A. The device is powered by a 32-bit ARM microcontroller running at 120 MHz.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
