Description
The 6S3P XT90 15000mAh Li-ion battery is a high-capacity power pack designed for high-drain applications. It is ideal for heavy-lift multicopters, Unmanned Ground Vehicles (UGVs), and portable power stations.
The 6S3P Li-ion battery configuration (6 cells in series, 3 in parallel) delivers a nominal voltage of 21.6V and a capacity of 15000mAh.
This provides a stable power supply for FPV drone powertrains and onboard systems (ESCs, brushless motors, flight controllers, and video transmitters), as well as UGV equipment (traction motors, motor drivers, onboard computers, optics, sensors, and actuators).
This 15000mAh drone lithium-ion battery is designed for 8–10 inch FPV drones, 13–15 inch heavy-lift copters, 15–21 inch platforms, and UGV drivetrains operating on a 24V electrical system. It is also suitable for powering controllers and communication systems in lightweight UGVs and portable ground control stations.
The XT90 power connector provides a contact resistance of approximately 0.30 mOhm, handling a continuous current load of up to 90A, and up to 120–150A in peak bursts (up to 15 seconds). This guarantees minimal voltage drop and low power loss, while maintaining housing temperature resistance up to +120°C under heavy loads.
Key Advantages:
massive 15000mAh capacity — the 6S3P battery operates more efficiently on 10+ inch UAVs compared to a 6S2P setup;
the XT90 connector is designed for high-current applications, ensuring reduced power loss and increased discharge rates;
quick connection without the risk of reverse polarity.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion (thermally controlled, stable chemistry)
- Capacity: 15000mAh (15Ah)
- Configuration: 6S3P
- Nominal Voltage: 21.6V
- Maximum Voltage: 25.2V
- Connector: XT90
- Max Charge Current: 30A (2C)
- Max Discharge Current: 330A (22C)
- Output Current: designed for medium to high loads
- Protection: factory cell balancing, heat-resistant wrap
- Weight: ~1.3 kg
FT Li-ion Battery 6S3P 15000mAh 21.6V XT90
A 21.6V 15000mAh battery for high-draw FPV drones and robotic platforms. It is equipped with a 2-pin XT90 connector capable of handling over 100A of continuous current without voltage sag, and a peak current of up to 220A.
Manufacturer: FT6 224₴
In stock < 1000 pcs.
Description
The 6S3P XT90 15000mAh Li-ion battery is a high-capacity power pack designed for high-drain applications. It is ideal for heavy-lift multicopters, Unmanned Ground Vehicles (UGVs), and portable power stations.
The 6S3P Li-ion battery configuration (6 cells in series, 3 in parallel) delivers a nominal voltage of 21.6V and a capacity of 15000mAh.
This provides a stable power supply for FPV drone powertrains and onboard systems (ESCs, brushless motors, flight controllers, and video transmitters), as well as UGV equipment (traction motors, motor drivers, onboard computers, optics, sensors, and actuators).
This 15000mAh drone lithium-ion battery is designed for 8–10 inch FPV drones, 13–15 inch heavy-lift copters, 15–21 inch platforms, and UGV drivetrains operating on a 24V electrical system. It is also suitable for powering controllers and communication systems in lightweight UGVs and portable ground control stations.
The XT90 power connector provides a contact resistance of approximately 0.30 mOhm, handling a continuous current load of up to 90A, and up to 120–150A in peak bursts (up to 15 seconds). This guarantees minimal voltage drop and low power loss, while maintaining housing temperature resistance up to +120°C under heavy loads.
Key Advantages:
massive 15000mAh capacity — the 6S3P battery operates more efficiently on 10+ inch UAVs compared to a 6S2P setup;
the XT90 connector is designed for high-current applications, ensuring reduced power loss and increased discharge rates;
quick connection without the risk of reverse polarity.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion (thermally controlled, stable chemistry)
- Capacity: 15000mAh (15Ah)
- Configuration: 6S3P
- Nominal Voltage: 21.6V
- Maximum Voltage: 25.2V
- Connector: XT90
- Max Charge Current: 30A (2C)
- Max Discharge Current: 330A (22C)
- Output Current: designed for medium to high loads
- Protection: factory cell balancing, heat-resistant wrap
- Weight: ~1.3 kg
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 6 037₴ |
| From 100 to 999 | 5 913₴ |
This product is often purchased with
-
1 881₴ Add to cartBrushless Motor for FPV Drone FT 4220 400KV 6S–8S
The FT 4220 400KV motor, featuring a Ø49.5 × 58 mm rotor and a peak power of up to 2186.7 W, is designed for builds with 15–17 inch propellers powered by 6S–8S batteries. Thanks to its massive torque and high energy efficiency, it is perfectly suited for heavy-lift quadcopters, agricultural drones, aerial photography platforms, and long-range drones requiring extended hover… -
7 414₴ Add to cartHeavy Line F415 15” Carbon Fiber FPV Drone Frame
Heavy Line F415 carbon fiber frame designed for large-scale 15-inch FPV drone builds. Features heavy-duty 10mm pressed carbon fiber arms. The mounting base supports 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a full mounting kit for camera and video transmitter. - Out of stock
2 532₴FT F722 PRO HV 3–8S Flight Controller
High-performance flight controller on STM32F722, featuring dual gyros, OSD, BEC, and 3–8S support for stable flight. - Expected in stock2 187₴
Brushless Motor for FPV Drone FT 4220 650KV 6S
The FT 4220 650KV motor, featuring a Ø49.5 × 58 mm rotor and a maximum power of up to 1961.8 W, is designed for builds with 13–15 inch propellers and 6S power. It is widely used on heavy FPV drones and powerful heavy-lift platforms, as it ensures high flight speeds and instant acceleration under load. -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware.
