Propeller Set for 9″ FPV FT 9×4.5×3 2CW+2CCW
9-inch 3-blade propellers 9×4.5×3 for FPV drones. Material — glass-filled polyamide, weight — 16 g. They have a 4.5″ pitch. Mounting hole — M5. The set includes 4 pieces (2 CW and 2 CCW).
449₴
In stock < 100 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 436₴ |
| From 100 to 999 | 427₴ |
Product description
The 9-inch FPV propellers feature a 9″ diameter and three blades. Compatible with 2812 and 3115 motors. They are suitable for FPV platforms with a maximum takeoff weight of 7-9 kg.
The 9×4.5×3 designation indicates the key characteristics:
diameter — 9″;
pitch — 4.5″;
number of blades — 3.
The 9-inch FPV propellers are made of durable glass-filled polyamide, which is highly resistant to loads. The weight is 16 g. The 3-blade configuration provides an optimal balance between high thrust, efficiency, and maximum flight speed.
When choosing 9×4.5×3 propellers, it is important to remember that the 4.5″ pitch is a distinct parameter. It determines the theoretical travel distance per one revolution without accounting for slip, and together with the 9″ diameter, it strikes a balance between thrust, motor load, and the drone’s potential speed.
By ordering the 9-inch FPV propellers, you receive a set of 4 props (2 CW + 2 CCW). They feature an M5 mounting hole. During installation, it is absolutely necessary to consider the rotation direction of the props.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Propeller diameter: 9″
- Pitch: 4.5″
- Number of blades: 3
- Package contents: 2CW+2CCW
- Mounting hole: M5
- Material: glass-filled polyamide
- Single propeller weight: 16 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT60
A 21.6V 15000mAh battery for builds requiring extended runtime. It delivers a stable 60A continuous current without critical voltage sag, along with a 180A peak current. Equipped with a 2-pin XT60 connector. -
1 232₴ Add to cartKHARAK 9” 380mm Carbon Fiber FPV Drone Frame
KHARAK 380mm carbon fiber frame for 9-inch FPV drone builds. Features durable 6mm thick carbon arms and a universal stack mounting pattern supporting 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a mounting kit for camera and video transmitter. -
1 451₴ Add to cartBrushless Motor for FPV Drone FT 3115 800KV 6S–8S
The FT 3115 800KV motor, featuring a Ø37.5 × 41 mm rotor and a peak power of up to 1724.6 W, is designed for builds with 9–10 inch propellers powered by 6S–8S batteries. The large stator provides high torque for lifting heavy payloads, while the low KV rating ensures energy efficiency and prevents overheating on 10" FPV setups, long-range builds,… -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
