Propeller Set for 8″ FPV FT 8x6x3 2CW+2CCW
8-inch tri-blade glass-reinforced polyamide propellers for FPV drones. The 6″ pitch provides thrust and stability. Mounting hole: M5, weight: 13 g. The set includes 4 pieces: 2 CW and 2 CCW.
449₴
In stock < 100 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 436₴ |
| From 100 to 999 | 427₴ |
Product description
The 8-inch FPV propellers with the 8×6×3 size combine an 8″ diameter, a 6″ pitch, and a 3-blade configuration. These 8-inch FPV propellers are compatible with 2812 and 3115 motors and are designed for builds with a maximum takeoff weight of up to 6-8 kg.
The designation is decoded as follows: diameter — 8″, pitch — 6″, 3 blades. The 8x6x3 3-blade propellers provide:
significant thrust at low speeds;
a predictable propulsion system response to throttle changes;
stable drone operation under load, provided the motor is properly selected.
The 6″ pitch, together with the 8″ diameter, strikes a balance between thrust, motor load, and the drone’s potential speed.
The set includes 4 props (2 CW + 2 CCW). The 8-inch propellers feature an M5 mounting hole and are made of durable glass-filled polyamide.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Propeller diameter: 8″
- Pitch: 6″
- Number of blades: 3
- Package contents: 2CW+2CCW
- Mounting hole: M5
- Material: glass-filled polyamide
- Single propeller weight: 13 g
This product is often purchased with
-
4 588₴ Add to cartFT Li-ion Battery 6S2P 10000mAh 21.6V XT60
A 21.6V 10000mAh battery for 7-9" drones and UGVs. It delivers a 60A continuous current without significant voltage sag, reaches a peak current of 180A, and is equipped with a 2-pin XT60 connector. Comes with factory-balanced cells. -
1 202₴ Add to cartKHARAK 8” 350mm Carbon Fiber FPV Drone Frame
KHARAK 350mm carbon fiber frame for 8-inch FPV drone builds. Features durable 6mm thick carbon arms and a stack mounting pattern for 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a complete mounting kit for camera and video transmitter. -
944₴ Add to cartBrushless Motor for FPV Drone FT 2812 1900KV 6S
The FT 2812 1900KV motor, featuring a Ø33.3 × 36 mm rotor and a peak power of up to 2265.8 W, is designed for builds with 7–8 inch propellers on 6S power. The tall stator provides the necessary torque, while the 1900KV rating ensures maximum speed and instant acceleration. The motor is perfectly suited for specialized 7" FPV setups, high-speed… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware. -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
