Propeller Set for 7″ FPV FT 7x6x2 2CW+2CCW
7-inch 2-blade FT 7x6x2 propellers with a 6″ pitch made of glass-filled polyamide. Mounting hole — M5, single propeller weight is 7 g. The set includes 4 pieces: 2 CW and 2 CCW.
449₴
In stock < 100 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 436₴ |
| From 100 to 999 | 427₴ |
Product description
The 7-inch 2-blade FPV propellers with a 6-inch pitch offer moderate thrust but allow for a high maximum speed. This makes them a good choice for small high-speed drones. They are made of glass-filled polyamide — a durable plastic reinforced with fiberglass.
The 7x6x2 FPV propeller designation indicates that they have a 7″ diameter, a 6″ pitch, and a 2-blade design. The weight of a single propeller is 7 g. They feature an M5 mounting hole.
The 7-inch 2-blade FPV propellers have a smaller blade area and create less load on the motor. Thus, they contribute to higher propulsion system efficiency in cruising modes, which helps reduce energy consumption.
The set includes four 7-inch FPV propellers. These include 2 CW (clockwise rotation) and 2 CCW (counter-clockwise rotation).
During installation, it is necessary to consider the motor rotation direction and install the propellers according to the flight controller layout.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Propeller diameter: 7″
- Pitch: 6″
- Number of blades: 2
- Package contents: 2CW+2CCW
- Mounting hole: M5
- Material: glass-filled polyamide
- Single propeller weight: 7 g
This product is often purchased with
-
4 588₴ Add to cartFT Li-ion Battery 6S2P 10000mAh 21.6V XT60
A 21.6V 10000mAh battery for 7-9" drones and UGVs. It delivers a 60A continuous current without significant voltage sag, reaches a peak current of 180A, and is equipped with a 2-pin XT60 connector. Comes with factory-balanced cells. -
1 148₴ Add to cartKHARAK 7” 320mm Carbon Fiber FPV Drone Frame
The KHARAK 320mm carbon fiber frame is designed for 7-inch FPV drone builds. The construction features durable 6mm thick carbon arms. The frame is compatible with flight stacks supporting 30.5 × 30.5 mm and 20 × 20 mm mounting patterns. -
892₴ Add to cartBrushless Motor for FPV Drone FT 2807 1300KV 6S–8S
The FT 2807 1300KV motor, measuring Ø33.3 × 32 mm with a peak power of up to 1600 W, is designed for 7-inch builds powered by 6S–8S batteries. Thanks to the perfect balance between high torque and moderate current consumption, it is an optimal choice for 7" FPV drones with a takeoff weight of up to 3 kg, as well… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware. -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
