FT PDB X8 4–12S 300 A Power Distribution Board
The FT PDB X8 4–12S 300 A power distribution board is a solution supporting 8 motors for multirotor configurations. Built-in 5V, 9V, and 12V BECs at 5A each provide power to peripherals, while the analog current sensor allows monitoring of the power system’s total consumption. The availability of two mounting hole patterns, 20 × 20 and 30.5 × 30.5 mm, ensures compatibility with most modern FPV frames.
Manufacturer: FT2 998₴
In stock < 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 2 908₴ |
| From 100 to 999 | 2 848₴ |
Product description
The FT PDB X8 4–12S 300 A is a power distribution board designed for configurations supporting up to 8 motors. It receives power from 4–12S batteries and distributes it across 8 channels. The allowable continuous current of up to 300 A per channel allows the FT PDB X8 to be used in high-load power systems where the board needs to provide substantial current throughput. This configuration makes this PDB an effective hub for heavy multirotor UAVs.
A distinct advantage of this model is the built-in BECs (5V, 9V, and 12V at 5A each) for powering the receiver, video transmitter, camera, flight controller, or other peripherals. This allows you to get the required voltage for your electronics without using an additional converter. A built-in analog current sensor provides measurement of the power system’s consumption, and there are also solder pads for outputting telemetry from the connected motors to the flight controller.
The 8 power outputs of the FT PDB are equipped with XT60 (Female) connectors and solder pads. Opposite each power output are contacts corresponding to the signal channels for motor control, S1–S8. The LED indication on the FT Power Distribution Board X8 provides visual readiness monitoring for the BECs (separately for 5V, 9V, and 12V). Mounting holes for M3 dampeners with 30.5 × 30.5 and 45.5 × 45.5 mm patterns expand the installation options on compatible frames.
Wiring Diagram
Package Contents
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Motor Support: 8 (S1–S8)
- Input Voltage: 4–12S (16–50.4V)
- Output Voltage: VBAT
- Continuous Current: 300A
- BEC Outputs: 5V / 5A, 9V / 5A, 12V / 5A
- Current Sensor: Built-in
- Telemetry: Supported
- ESC Power Connectors: 8 × XT60
- Power Contacts: BAT, GND
- LED Indication: Built-in
- Operating Temperature: -20°C to +55°C
- Board Material: Heavy Copper FR-4 PCB
- Mounting Holes: 30.5 × 30.5 mm / 45.5 × 45.5 mm (M3)
- Dimensions: Ø140 mm (Ø150 mm with connectors)
- Weight: 112 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT150
A high-capacity 6S3P 15000mAh 21.6V XT150 Li-ion battery for heavy-lift copters, high-speed drones, heavy UGVs, and power-hungry stations. The XT150 connector eliminates current load restrictions, delivering up to 165A continuous and 300A burst current without overheating or melting the contacts. -
6 997₴ Add to cartHeavy Line F418 18” Carbon Fiber FPV Drone Frame
Heavy Line F418 carbon fiber frame designed for 18–18.5 inch FPV drone propellers. Features 10mm thick high-density carbon fiber arms. The stack mounting base supports 30.5 × 30.5 mm and 20 × 20 mm standards. Comes complete with camera and video transmitter mounting kit. -
11 378₴ Add to cartHeavy Line F421 21” Carbon Fiber FPV Drone Frame
Heavy Line F421 carbon fiber frame designed for 21-inch FPV drone systems. Manufactured from 3K carbon fiber with heavy-duty 10mm thick arms. Features a standard 30.5 × 30.5 mm stack mounting pattern. Comes complete with a camera and video transmitter mounting kit. -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
