FT Lithium-ion Battery INR 21700 5000mAh 180A
The INR 21700 5000mAh (36C) battery is a high-discharge, high-capacity cell. Thanks to their high energy density, these cells are perfect for long-range FPV drones and Unmanned Ground Vehicles (UGVs), where stable sustained current, maximum runtime, and extended flight or driving range are top priorities.
In stock > 1000 pcs.
276₴
In stock > 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 268₴ |
| From 100 to 999 | 262₴ |
Product description
The INR 21700 5000mAh Li-ion battery is a 21700 format cell designed for building high-power battery packs (for FPV drones, Unmanned Ground Vehicles, and portable charging stations).
The 21700 format denotes a diameter of 21.2 mm and a length of 70 mm. Compared to the previous generation 18650 cells, the 21700 battery offers up to 50% more internal volume.
The INR abbreviation stands for modern Lithium Nickel Manganese Cobalt (NMC) chemistry, allowing the cell to consistently deliver high currents without severe overheating while maintaining maximum capacity.
The combination of a high discharge rate (125A continuous, 180A burst) and a true capacity of 5000mAh sets this cell apart from most alternatives on the market. It ensures stable operation under extreme loads and significantly extends flight range.
21700 Li-ion cells are used in battery packs for 7–10+ inch FPV drones, fixed-wing UAVs, UGVs, as well as portable charging stations and heavy-duty power banks.
The low internal resistance of this high-discharge 21700 cell prevents severe voltage sag under load, while the thermal stability of its chemistry minimizes heat generation and degradation during prolonged high-current operation.
Key Advantages:
5000mAh capacity in a compact 21700 footprint;
up to 180A (36C) burst discharge rate;
internal resistance ≤ 5 mOhm;
high energy density — up to 272 Wh/kg.
User Manual
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Cell Type: Li-ion
- Chemistry: INR
- Form Factor: 21700
- Nominal Capacity: 5000mAh
- Nominal Voltage: 3.6V
- Maximum voltage: 4.2V
- Energy Capacity: 18Wh
- Continuous Discharge Current: 125A (25C)
- Max Discharge Current: 180A (36C) for up to 5 seconds
- Discharge Cut-off Voltage: 2.5V
- Max Charge Voltage: 4.2V
- Initial Internal Resistance: ≤ 5 mOhm
- Energy Density: 272 Wh/kg
- Dimensions: ⌀21.2 × 70.5 mm
- Weight: 65 g
This product is often purchased with
-
3 417₴ Add to cartFT VTX 2.7GHz 4W 16CH SMA Video Transmitter
FT VTX 2.7GHz FPV video transmitter featuring 16 channels and up to 4W of power. Supports the IRC Tramp protocol, 7–36V input, active cooling, and comes equipped with an SMA Female connector. -
1 202₴ Add to cartKHARAK 8” 350mm Carbon Fiber FPV Drone Frame
KHARAK 350mm carbon fiber frame for 8-inch FPV drone builds. Features durable 6mm thick carbon arms and a stack mounting pattern for 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a complete mounting kit for camera and video transmitter. -
449₴ Add to cartPropeller Set for 8″ FPV FT 8x6x3 2CW+2CCW
8-inch tri-blade glass-reinforced polyamide propellers for FPV drones. The 6″ pitch provides thrust and stability. Mounting hole: M5, weight: 13 g. The set includes 4 pieces: 2 CW and 2 CCW. -
944₴ Add to cartBrushless Motor for FPV Drone FT 2812 1100KV 6S
The FT 2812 1100KV motor, featuring a Ø33.3 × 36 mm rotor and a maximum power of up to 1361.1 W, is designed for drones with 6–8 inch propellers and 6S power. It is perfectly suited for 7–8" heavy-lift FPV and long-range drones. The motor provides sufficient torque for lifting payloads, while the moderate KV rating prevents overheating when using… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.



