KHARAK 10” 420mm Carbon Fiber FPV Drone Frame
KHARAK 420mm 10″ carbon fiber frame designed for 10-inch FPV drone builds. Features heavy-duty 7mm pressed carbon arms. Equipped with a universal stack mounting pattern for 30.5 × 30.5 mm (M3) and 20 × 20 mm options. Includes a complete mounting kit for camera and video transmitter.
1 977₴
In stock < 100 pcs.
- У кошику вже максимальна доступна кількість — 1
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 1 918₴ |
| From 100 to 999 | 1 878₴ |
Product description
The KHARAK 10” 420mm carbon fiber FPV drone frame is a scaled-up 4-arm X-platform designed for 10-inch propeller builds. The 10-inch FPV frame layout is a popular universal format offering an optimal price-to-performance ratio for a wide range of FPV builds.
The key feature of this model is its reinforced pressed carbon arms with a thickness of 7 mm. Combined with 3mm thick plates, this structural design handles elevated loads typical for 10-inch setups. Thanks to its rigid design, this carbon FPV drone frame helps prevent flex under high stress, preserving frame geometry during aggressive maneuvering, vibrations, and hard landings.
The central section measures 235 × 45 mm with an elongated layout. This makes it easier to position the flight controller, ESC, video system, GPS, receiver, and other electronics inside the True-X drone frame. Assembled dimensions of the KHARAK 10″ frame are 335 × 335 × 65 mm. It is ideal for standard 10-inch builds using 3115 motors and 6S3P battery packs.
Flight stack mounting options include 30.5 × 30.5 mm (M3) and 20 × 20 mm (M2/M3) standards. The frame is compatible with 28xx and 31xx size motors. Motor installation relies on four M3 screws, and the total frame weight is 345 g. Comes complete with plastic mounts for a 20mm camera and FT VTX.
Package Includes:
- Top plate KR-10, 3 mm — 1 pc.
- Bottom plate KR-10, 3 mm — 1 pc.
- X-brace KR-10, 4 mm — 2 pcs.
- Arm KR-10, 7 mm — 4 pcs.
- M3×30 Standoff — 8 pcs.
- M3×10 Button head screw — 16 pcs.
- M3×35 Socket head cap screw — 4 pcs.
- M4×14 Button head screw — 1 pc.
- M4×20 Button head screw — 4 pcs.
- Video Transmitter (VTX) Mount — 1 pc.
- Quick-release VTX Mount — 1 pc.
- Camera Mount — 1 pc.
- Rubber Pad Set — 1 set
Manual & Specifications
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Frame Class (Propeller Size): 10″
- Wheelbase (Motor-to-Motor): 420 mm
- Geometry: True-X (4 arms)
- Material: Carbon Fiber
- Arm Thickness: 7 mm
- Plate Thickness: 3 mm (bottom), 3 mm (top)
- Central Section Size: 235 × 45 mm
- Stack Mounting Pattern (FC/ESC): 30.5 × 30.5 mm (M3) & 20 × 20 mm (M2/M3)
- Auxiliary Mounting Holes: Ø3 mm, Ø2.1–2.15 mm
- Motor Mounting Pattern: Ø17–Ø20 mm (4 × M3)
- Motor Compatibility: 28xx, 31xx
- Assembled Dimensions: 335 × 335 × 65 mm
- Weight: 345 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT90
A 21.6V 15000mAh battery for high-draw FPV drones and robotic platforms. It is equipped with a 2-pin XT90 connector capable of handling over 100A of continuous current without voltage sag, and a peak current of up to 220A. -
449₴ Add to cartPropeller Set for 10″ FPV FT 10x5x3 2CW+2CCW
10-inch 10x5x3 propellers made of glass-filled polyamide for drones. They feature a 5″ pitch for a balance of thrust and efficiency. Mounting hole — M5, weight — 16.5 g. The set includes 4 pieces: 2 CW and 2 CCW. -
1 451₴ Add to cartBrushless Motor for FPV Drone FT 3115 900KV 6S–8S
The FT 3115 900KV motor, featuring a Ø37.5 × 41 mm rotor, is designed for builds with 9–10 inch propellers. It supports 3S–8S power and reaches a peak power of up to 1724.6 W. The motor is perfectly suited for 10-inch FPV drones, long-range platforms, and heavy-lift multicopters focused on extended hover times. -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU. -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
