FT ESC 90A 4-in-1 4-8S (32-bit) Speed Controller
The FT ESC 90A 4-in-1 speed controller is designed for drones with a 4–8S power supply. Each channel handles a continuous current of up to 90A. The built-in 32-bit MCU runs on AM32 firmware and supports PWM and DShot 300/600/1200/2400 protocols.
Manufacturer: FT5 846₴
Out of stock
- У кошику вже максимальна доступна кількість — 1
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 5 671₴ |
| From 100 to 999 | 5 554₴ |
Product description
The FT ESC 90A 4-in-1 speed controller is a 4-channel board with a continuous current of up to 90A per channel, designed for 4–8S batteries. It is an excellent solution for heavy-lift drones up to 18 inches and high-speed multicopters.
The ESC integrates the power section in a compact design with an aluminum heatsink. Command processing is handled by a 32-bit MCU with AM32 firmware. The controller supports PWM and DShot protocols, making it compatible with most flight controllers.
The 90A ESC is equipped with a 5V / 3A BEC (Battery Eliminator Circuit) to power electronics. External capacitors and an integrated PFB filter are used for additional filtering. The board is built on an 8-layer PCB with 3oz copper, features a 30.5 × 30.5 mm mounting pattern for M3 hardware, and measures 55 × 60.5 mm.
Wiring Diagram
Package Contents
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Channels: 4
- Direct Current: 90A × 4
- Input Voltage: 4–8S (16.8–33.6 V)
- Output Voltage: VBAT
- Microcontroller (MCU): 32-bit
- Firmware: AM32
- Protocols: PWM / Oneshot / Multishot / DShot 300 / 600 / 1200 / 2400
- Current Sensor: Built-in
- Telemetry: Supported
- PCB: 8-layer, 3oz copper
- MOSFET: 60V / 0.9mΩ
- Capacitors: 2200µF / 35V (external)
- Filtering: Integrated PFB filter
- TVS Protection: 2 × 1500W
- BEC: 5V / 3A
- Cooling: Aluminum heatsink
- Motor Connection: Solder pads
- Mounting: 30.5 × 30.5 mm (M3)
- Dimensions: 55 × 60.5 mm
- Weight: 117 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT90
A 21.6V 15000mAh battery for high-draw FPV drones and robotic platforms. It is equipped with a 2-pin XT90 connector capable of handling over 100A of continuous current without voltage sag, and a peak current of up to 220A. -
1 056₴ Add to cartFT V7 6.0–8.0GHz RHCP SMA Male Video Antenna
The FT V7 6.0–8.0GHz RHCP is an omnidirectional antenna for video transmission and FPV systems. The 6000–8000 MHz range covers the 7.2 GHz frequency and allows operation on various channels within this band. RHCP polarization, a VSWR of < 1.5, and an SMA Male connector ensure compatibility with corresponding VTX/VRX equipment. Suitable for drones, relays, and ground stations. -
9 078₴ Add to cartHeavy Line F413 13” Carbon Fiber FPV Drone Frame
The Heavy Line F413 carbon fiber FPV drone frame is designed for building heavy-duty drones with 13-inch propellers. It features 8mm 3K carbon fiber arms. Flight stacks mount onto a standard 30.5 × 30.5 mm base. Comes complete with a camera and video transmitter mounting kit, as well as arm mounts for FT K5 control antennas. -
7 414₴ Add to cartHeavy Line F415 15” Carbon Fiber FPV Drone Frame
Heavy Line F415 carbon fiber frame designed for large-scale 15-inch FPV drone builds. Features heavy-duty 10mm pressed carbon fiber arms. The mounting base supports 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a full mounting kit for camera and video transmitter. -
1 881₴ Add to cartBrushless Motor for FPV Drone FT 4220 400KV 6S–8S
The FT 4220 400KV motor, featuring a Ø49.5 × 58 mm rotor and a peak power of up to 2186.7 W, is designed for builds with 15–17 inch propellers powered by 6S–8S batteries. Thanks to its massive torque and high energy efficiency, it is perfectly suited for heavy-lift quadcopters, agricultural drones, aerial photography platforms, and long-range drones requiring extended hover… -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for…
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
