Propeller Set for 18″ FPV FT 18x10x3 2CW+2CCW
18-inch 3-blade propellers made of glass-filled polyamide. They feature a 10″ pitch. Single prop weight — 143 g. Mounting hole — M6. The set includes 4 pieces: 2 CW and 2 CCW.
1 104₴
Out of stock
- The cart already has the maximum available quantity — 1
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 1 071₴ |
| From 100 to 999 | 1 049₴ |
Product description
The 18-inch FPV propellers feature a high 10″ pitch, 3 blades, and an M6 mount. They are designed for super-heavy platforms and industrial UAVs that require high payload capacity and efficient thrust.
When selecting components for large-scale copters, it is important to check compatibility with the motor group. You must ensure that the system is designed for the full 18x10x3 propeller size. It is also necessary to verify the M6 mounting hole against the motor shaft or mounting system and ensure there is no play.
The high 10″ pitch of the 18-inch FPV propellers provides significant thrust and dynamics, but at the same time creates a heavy load on the motor. Therefore, it is important to consider the motor’s specifications: its KV rating, operating voltage, and the allowable ESC current.
The set includes 4 pieces of 18-inch FPV propellers (2 CW and 2 CCW) to equip the four motors of a quadcopter. During installation on the frame, it is strictly necessary to consider the blade rotation direction and install the parts correctly according to the motors.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Propeller diameter: 18″
- Pitch: 10″
- Number of blades: 3
- Package contents: 2CW+2CCW
- Mounting hole: M6
- Material: glass-filled polyamide
- Single propeller weight: 143 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT150
A high-capacity 6S3P 15000mAh 21.6V XT150 Li-ion battery for heavy-lift copters, high-speed drones, heavy UGVs, and power-hungry stations. The XT150 connector eliminates current load restrictions, delivering up to 165A continuous and 300A burst current without overheating or melting the contacts. -
6 997₴ Add to cartHeavy Line F418 18” Carbon Fiber FPV Drone Frame
Heavy Line F418 carbon fiber frame designed for 18–18.5 inch FPV drone propellers. Features 10mm thick high-density carbon fiber arms. The stack mounting base supports 30.5 × 30.5 mm and 20 × 20 mm standards. Comes complete with camera and video transmitter mounting kit. -
2 998₴ Add to cartFT PDB X8 4–12S 300 A Power Distribution Board
The FT PDB X8 4–12S 300 A power distribution board is a solution supporting 8 motors for multirotor configurations. Built-in 5V, 9V, and 12V BECs at 5A each provide power to peripherals, while the analog current sensor allows monitoring of the power system's total consumption. The availability of two mounting hole patterns, 20 × 20 and 30.5 × 30.5 mm,… -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
