Propeller Set for 10″ FPV FT 10x5x3 2CW+2CCW
10-inch 10x5x3 propellers made of glass-filled polyamide for drones. They feature a 5″ pitch for a balance of thrust and efficiency. Mounting hole — M5, weight — 16.5 g. The set includes 4 pieces: 2 CW and 2 CCW.
449₴
In stock < 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 436₴ |
| From 100 to 999 | 427₴ |
Product description
The 10-inch FPV propellers with the 10x5x3 size are designed for heavy builds that require stable flight. When choosing 10-inch FPV propellers, it is important to pay attention to the designation.
In the 10×5×3 size:10″ is the diameter, 5″ is the pitch, 3 is the number of blades. They are made of durable glass-filled polyamide. The weight of a single piece is 16.5 g.
The combination of a 10″ diameter and a 5″ pitch is designed for large platforms where stability, thrust, and a controlled load on the propulsion system are essential.
The set includes four 10-inch FPV propellers: 2 CW + 2 CCW. Before installing the 10×5×3 FPV propellers, you should check their compatibility with the motors and frame, as well as the KV matching.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Propeller diameter: 10″
- Pitch: 5″
- Number of blades: 3
- Package contents: 2CW+2CCW
- Mounting hole: M5
- Material: glass-filled polyamide
- Single propeller weight: 16.5 g
This product is often purchased with
-
6 224₴ Add to cartFT Li-ion Battery 6S3P 15000mAh 21.6V XT90
A 21.6V 15000mAh battery for high-draw FPV drones and robotic platforms. It is equipped with a 2-pin XT90 connector capable of handling over 100A of continuous current without voltage sag, and a peak current of up to 220A. -
1 977₴ Add to cartKHARAK 10” 420mm Carbon Fiber FPV Drone Frame
KHARAK 420mm 10" carbon fiber frame designed for 10-inch FPV drone builds. Features heavy-duty 7mm pressed carbon arms. Equipped with a universal stack mounting pattern for 30.5 × 30.5 mm (M3) and 20 × 20 mm options. Includes a complete mounting kit for camera and video transmitter. -
1 451₴ Add to cartBrushless Motor for FPV Drone FT 3115 900KV 6S–8S
The FT 3115 900KV motor, featuring a Ø37.5 × 41 mm rotor, is designed for builds with 9–10 inch propellers. It supports 3S–8S power and reaches a peak power of up to 1724.6 W. The motor is perfectly suited for 10-inch FPV drones, long-range platforms, and heavy-lift multicopters focused on extended hover times. -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation… -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
