FT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation of onboard systems.
Manufacturer: FT2 125₴
In stock < 1000 pcs.
- The cart already has the maximum available quantity — 1
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 2 061₴ |
| From 100 to 999 | 2 019₴ |
Product description
The FT F722 V1 flight controller is the base version based on the STM32F722RET6 MCU with a frequency of up to 216 MHz. The model is equipped with a single ICM-42688-P gyroscope, which measures the drone’s rotation around its axes and transmits data to the control system. The input voltage range is 7–36V, allowing the controller to be used in UAVs powered by 3–8S batteries.
For analog video, an AT7456E OSD chip is provided, overlaying flight information onto the camera feed. To estimate altitude based on atmospheric pressure, the FT F722 V1 flight controller features a built-in DPS310 barometer (or equivalent), while an LC filter helps reduce electrical noise in the power supply system. The built-in 16MB Blackbox memory allows flight data recording for further analysis and tuning.
The flight controller features 8 signal pads for motor control with PWM and DSHOT support, along with 5 UART ports, 1 I2C port for connecting external devices, and a BZ- pad for a buzzer. You can connect an electronic speed controller (ESC), a camera, a digital or analog video transmitter (VTX), a control receiver, a GPS module, and other compatible peripherals. An adjustable pad with a choice of 5V or V-BATT voltage is provided for powering the VTX.
Wiring Diagram
Package Contents
User Manual
Firmware File
Target File
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- MCU: STM32F722RET6 (up to 216 MHz)
- Gyroscope: ICM-42688-P or equivalent
- Barometer: DPS310 or equivalent
- OSD Chip: AT7456E (CVBS OSD)
- Blackbox Memory: 16 MB (SPI Flash) or equivalent
- Input Voltage: 3–8S (7–36V)
- BEC: 5V / 3A
- Camera Switch (CAM switch): CAM1
- Ports: 8 × PWM / 5 × UART / 1 × I2C / 2 × ADC (V-BATT / CURR-ESC) / Buzzer (BZ-)
- LC Filter: for power supply noise protection
- Mounting Pattern: 30.5 × 30.5 mm
- Hole Diameter: 4 mm (for M3 dampeners)
- Dimensions: 36.5 × 37 × 5.2 mm
- Weight: 8 g
This product is often purchased with
-
1 056₴ Add to cartFT V3 2.7–3.5GHz RHCP SMA Male Video Antenna
FT V3 2.7–3.5GHz RHCP is an omnidirectional antenna for transmitting and receiving FPV video. The 2700–3500 MHz operating range covers the 3.3 GHz frequency. RHCP polarization, a VSWR of < 1.2, and an SMA Male connector ensure excellent matching with compatible VTX/VRX. Suitable for drones, relays, and ground stations over both short and long distances. -
3 417₴ Add to cartFT VTX 2.7GHz 4W 16CH SMA Video Transmitter
FT VTX 2.7GHz FPV video transmitter featuring 16 channels and up to 4W of power. Supports the IRC Tramp protocol, 7–36V input, active cooling, and comes equipped with an SMA Female connector. -
3 298₴ Add to cartFT VTX 3.3GHz 4W 16CH SMA Video Transmitter
FT VTX 3.3GHz FPV video transmitter featuring 16 channels and up to 4W of power. Supports the IRC Tramp protocol, features an SMA Female connector, 7–36V input, and active cooling. -
2 138₴ Add to cartCaddx Ratel Pro V2 1/1.8″ 1500TVL FPV Camera
The Caddx Ratel Pro V2 1/1.8″ 1500 TVL analog FPV camera features Super WDR (HDR) technology to retain details in both bright and dark areas of the frame. It has a 125° FOV and 0.00001 Lux sensitivity. Supports NTSC / PAL, 16:9 / 4:3 aspect ratios, and a manual OSD menu. -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU. -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware. -
3 012₴ Add to cartFT ESC 75A 4-in-1 3-6S (8-bit) Speed Controller
The FT ESC 75A 4-in-1 speed controller is a reliable solution for FPV builds with a 3–6S power supply. The board handles a continuous current of up to 75A per channel, ensuring stable control of four motors from a single device.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
