FT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware.
Manufacturer: FT3 077₴
In stock < 1000 pcs.
- Ви не можете додати ще "Патч-антена відеозв’язку FT 2.7–2.9GHz 21dBi RHCP" до кошика. Переглянути кошик
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 2 985₴ |
| From 100 to 999 | 2 923₴ |
Product description
The FT ESC 65A 4-in-1 speed controller combines 4 channels with a continuous current of 65A per channel and is designed for an input voltage of 12.6–25.2 V (3–6S). This current margin allows the use of the controller with powerful motors in the 28xx and 31xx form factors.
The 65A 3–6S ESC is built on a 32-bit microcontroller and runs on AM32 firmware, providing flexible parameter configuration. It supports PWM motor control and digital DShot protocols. The speed controller provides telemetry transmission, allowing you to monitor the main parameters of the power system.
The board is equipped with an aluminum heatsink, which promotes efficient heat dissipation. The FT ESC 65A 4-in-1 features a 30.5 × 30.5 mm mounting pattern for M3 screws, making it easy to integrate into stacks and mount on frames. The board dimensions are 54 × 38 mm, and the weight is 25 g.
Wiring Diagram
Package Contents
User Manual
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Channels: 4
- Direct Current: 65A × 4
- Peak Current: 70A
- Input Voltage: 3–6S (12.6–25.2 V)
- Output Voltage: VBAT
- Microcontroller (MCU): 32-bit
- Firmware: AM32 v2.18
- Protocols: PWM / DShot 300 / 600 / 1200 / 2400
- Current Sensor: Built-in
- Telemetry: Supported (KISS compatible)
- PCB: 6-layer, 3oz copper
- MOSFET: 40V / 0.8mΩ
- Capacitors: 2 × 680µF / 35V (external)
- Filtering: Integrated PFB filter
- TVS Protection: 4 × 600W
- BEC: 12V
- Cooling: Aluminum heatsink
- Motor Connection: Solder pads
- Mounting: 30.5 × 30.5 mm (M3)
- Dimensions: 54 × 38 mm
- Weight: 25 g
This product is often purchased with
-
4 588₴ Add to cartFT Li-ion Battery 6S2P 10000mAh 21.6V XT60
A 21.6V 10000mAh battery for 7-9" drones and UGVs. It delivers a 60A continuous current without significant voltage sag, reaches a peak current of 180A, and is equipped with a 2-pin XT60 connector. Comes with factory-balanced cells. -
1 148₴ Add to cartKHARAK 7” 320mm Carbon Fiber FPV Drone Frame
The KHARAK 320mm carbon fiber frame is designed for 7-inch FPV drone builds. The construction features durable 6mm thick carbon arms. The frame is compatible with flight stacks supporting 30.5 × 30.5 mm and 20 × 20 mm mounting patterns. -
1 202₴ Add to cartKHARAK 8” 350mm Carbon Fiber FPV Drone Frame
KHARAK 350mm carbon fiber frame for 8-inch FPV drone builds. Features durable 6mm thick carbon arms and a stack mounting pattern for 30.5 × 30.5 mm and 20 × 20 mm electronics. Includes a complete mounting kit for camera and video transmitter. -
449₴ Add to cartPropeller Set for 7″ FPV FT 7x6x2 2CW+2CCW
7-inch 2-blade FT 7x6x2 propellers with a 6″ pitch made of glass-filled polyamide. Mounting hole — M5, single propeller weight is 7 g. The set includes 4 pieces: 2 CW and 2 CCW. -
449₴ Add to cartPropeller Set for 8″ FPV FT 8x6x3 2CW+2CCW
8-inch tri-blade glass-reinforced polyamide propellers for FPV drones. The 6″ pitch provides thrust and stability. Mounting hole: M5, weight: 13 g. The set includes 4 pieces: 2 CW and 2 CCW. -
892₴ Add to cartBrushless Motor for FPV Drone FT 2807 1300KV 6S–8S
The FT 2807 1300KV motor, measuring Ø33.3 × 32 mm with a peak power of up to 1600 W, is designed for 7-inch builds powered by 6S–8S batteries. Thanks to the perfect balance between high torque and moderate current consumption, it is an optimal choice for 7" FPV drones with a takeoff weight of up to 3 kg, as well… -
2 125₴ Add to cartFT F722 V1 3–8S Flight Controller
The FT F722 V1 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and an ICM-42688-P gyroscope. Designed for a 3–8S power input, the model is equipped with an AT7456E OSD chip, 16MB of built-in Blackbox memory, and a 5V / 3A BEC to connect compatible peripherals and ensure the stable operation…
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
