FT 3.2–3.6GHz 18.5dBi RHCP FPV Patch Antenna
The FT 3.2–3.6GHz 18.5dBi RHCP patch antenna operates in the 3.2–3.6 GHz frequency range with a center frequency of 3.3 GHz and a bandwidth of 400 MHz. The 18.5 dBi gain along with a 26° horizontal and 14° vertical beam pattern combine high directivity with a wider horizontal coverage sector. The model features RHCP polarization and an SMA Female connector.
5 818₴
In stock < 100 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 5 643₴ |
| From 100 to 999 | 5 527₴ |
Product description
The FT 3.2–3.6 GHz 18.5 dBi RHCP FPV patch antenna operates in the 3200–3600 MHz frequency range with a center frequency of 3.3 GHz. The 400 MHz bandwidth provides sufficient frequency margin across the entire band, making it fully compatible with the FT VTX 3.3GHz video transmitter.
The gain of 18.5 dBi is paired with a beam pattern of 14° horizontal and 26° vertical. The antenna can be mounted in either horizontal or vertical orientation depending on system configuration and required coverage area. Using the wider angle horizontally is ideal to expand coverage width, as vertical beam width is less critical when operating drones at long ranges.
The 3.3 GHz 18.5 dBi patch antenna is a mid-range gain model in its product line. Its key advantage lies not only in the 18.5 dBi gain rating, but also in its shaped radiation pattern, requiring separate consideration of horizontal and vertical coverage during aiming. This patch antenna features Right-Hand Circular Polarization (RHCP) and an SMA Female connector for connecting to compatible equipment.
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Antenna Type: Directional patch antenna
- Frequency Range: 3200–3600 MHz
- Center Frequency: 3.3 GHz
- Polarization: RHCP (Right-Hand Circular)
- Gain: 18.5 dBi
- Horizontal Beamwidth: 14°
- Vertical Beamwidth: 26°
- Bandwidth: 400 MHz
- Impedance: 50 Ohm
- Connector: SMA Female
- Dimensions: 330 × 170 × 23 mm
- Weight: 440 g
This product is often purchased with
-
4 911₴ Add to cartFT VRX 3.3GHz 16CH Video Receiver
The FT VRX 3.3GHz 16CH operates in the 3170–3470 MHz band and is designed for analog FPV systems. Its 16 channels provide flexible tuning for reliable video reception setup. -
1 056₴ Add to cartFT V3 2.7–3.5GHz RHCP SMA Male Video Antenna
FT V3 2.7–3.5GHz RHCP is an omnidirectional antenna for transmitting and receiving FPV video. The 2700–3500 MHz operating range covers the 3.3 GHz frequency. RHCP polarization, a VSWR of < 1.2, and an SMA Male connector ensure excellent matching with compatible VTX/VRX. Suitable for drones, relays, and ground stations over both short and long distances. -
2 138₴ Add to cartCaddx Ratel Pro V2 1/1.8″ 1500TVL FPV Camera
The Caddx Ratel Pro V2 1/1.8″ 1500 TVL analog FPV camera features Super WDR (HDR) technology to retain details in both bright and dark areas of the frame. It has a 125° FOV and 0.00001 Lux sensitivity. Supports NTSC / PAL, 16:9 / 4:3 aspect ratios, and a manual OSD menu. -
49 560₴ Add to cart21.5″ Full HD UAV GCS Case-Monitor
The 21.5″ Full HD UAV GCS case-monitor features a screen with a peak brightness of up to 1000 cd/m², AV, SDI, and HDMI inputs, and loop-through video outputs. It operates on 12–36 V via an XT60 connector, supports hot-swapping batteries, and includes six 1/4″ threaded holes for mounting additional equipment. -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for…
We are always open for new partnerships!
Write to us and we will reply as soon as possible.


