- У кошику вже максимальна доступна кількість — 1
New arrivals
Showing 1–12 of 14 results
Filters
-
449₴ Add to cartPropeller Set for 7″ FPV FT 7x6x2 2CW+2CCW
7-inch 2-blade FT 7x6x2 propellers with a 6″ pitch made of glass-filled polyamide. Mounting hole — M5, single propeller weight is 7 g. The set includes 4 pieces: 2 CW and 2 CCW. -
449₴ Add to cartPropeller Set for 10″ FPV FT 10x5x3 2CW+2CCW
10-inch 10x5x3 propellers made of glass-filled polyamide for drones. They feature a 5″ pitch for a balance of thrust and efficiency. Mounting hole — M5, weight — 16.5 g. The set includes 4 pieces: 2 CW and 2 CCW. -
6 372₴ Add to cartVideo Link Horn Antenna FT 4.8–6.0GHz 14 dBi RHCP
This video link horn antenna operates in the 4.8–6.0GHz frequency range with a 14 dBi gain and Right-Hand Circular Polarization (RHCP). It is designed for use with ground control stations. -
9 204₴ Add to cartVideo Link Horn Antenna FT 6.1–7.2GHz 19.5 dBi RHCP
This directional horn antenna receives and transmits video signals within the 6.1–7.2GHz range, delivering a 19.5 dBi gain. It is designed for Right-Hand Circular Polarization (RHCP). Ideal for long-range FPV builds, ground stations, and video relays. -
9 204₴ Add to cartVideo Link Horn Antenna FT 7.9–9.0GHz 21 dBi RHCP
A directional horn antenna FT for receiving and transmitting FPV video signals in the 7900–9000 MHz range. It features a 21 dBi gain, right-hand circular polarization (RHCP), and connects via an SMA Female connector. -
1 056₴ Add to cartFT V7 6.0–8.0GHz RHCP SMA Male Video Antenna
The FT V7 6.0–8.0GHz RHCP is an omnidirectional antenna for video transmission and FPV systems. The 6000–8000 MHz range covers the 7.2 GHz frequency and allows operation on various channels within this band. RHCP polarization, a VSWR of < 1.5, and an SMA Male connector ensure compatibility with corresponding VTX/VRX equipment. Suitable for drones, relays, and ground stations. -
2 138₴ Add to cartCaddx Ratel Pro V2 1/1.8″ 1500TVL FPV Camera
The Caddx Ratel Pro V2 1/1.8″ 1500 TVL analog FPV camera features Super WDR (HDR) technology to retain details in both bright and dark areas of the frame. It has a 125° FOV and 0.00001 Lux sensitivity. Supports NTSC / PAL, 16:9 / 4:3 aspect ratios, and a manual OSD menu. - Expected in stock
4 099₴FT VTX 4.8–7.2GHz 4W 176CH SMA Video Transmitter
FT VTX 4.8–7.2GHz FPV video transmitter featuring 176 channels and over 4W of power. Supports the IRC Tramp protocol, comes equipped with an SMA Female connector, and features active cooling. - Made to order
2 550₴ Add to cartDocking Station for FT VRX 1.2–7.2GHz
The FT VRX Dock (1.2–7.2GHz) is designed to control a single VRX module from the FT lineup, regardless of its operating frequency band. Automatic module detection, an OLED display, and a rotary encoder simplify setup, while the wide 2–8S LiPo input power range makes the station a versatile component for any ground station setup. -
5 589₴ Add to cartFT VTX 7.0–8.5GHz 5W 80CH SMA Video Transmitter
FT VTX 7.0–8.5GHz FPV video transmitter featuring 80 channels and up to 5W of power. Supports the IRC Tramp protocol, features an SMA Female connector, 15–36V input, and active cooling. -
1 451₴ Add to cartBrushless Motor for FPV Drone FT 3115 900KV 6S–8S
The FT 3115 900KV motor, featuring a Ø37.5 × 41 mm rotor, is designed for builds with 9–10 inch propellers. It supports 3S–8S power and reaches a peak power of up to 1724.6 W. The motor is perfectly suited for 10-inch FPV drones, long-range platforms, and heavy-lift multicopters focused on extended hover times. -
2 532₴ Add to cartFT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for…
Ready to cooperate?
We are always open for new partnerships!
Write to us and we will reply as soon as possible.
