FT K2 730–930 MHz Drone Control Antenna
FT K2 broadband control antenna (730–930 MHz) with linear polarization for ELRS and Gemini systems. Provides 2.0 ± 0.5 dBi gain and 50 Ohm impedance. Radiator length: 365 mm, weight: 19 g.
In stock < 1000 pcs.
486₴
In stock < 1000 pcs.
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 471₴ |
| From 100 to 999 | 462₴ |
Product description
The FT K2 omnidirectional drone control antenna is engineered for ExpressLRS and Gemini systems, operating across a wide frequency range of 730–930 MHz. The FT K2 model features a gain of 2.0 ± 0.5 dBi, linear polarization, and an omnidirectional radiation pattern in the horizontal plane.
The vertical beamwidth is approximately 65°, ensuring stable signal coverage within its propagation plane. The radiator is made of Ø 2 mm brass wire, while the mount is crafted from durable molded plastic. Special slots are integrated for quick and secure mounting onto frame arms using zip ties.
The FT K2 is rated for 50 Ohm impedance and a maximum input power of up to 20 W. The radiator length is 365 mm, cable (feeder) length is 150 mm, and total weight is 19 g. Connection is established via a standard IPEX1 (U.FL) connector.
Unlike typical dipole antennas, the K2 features a unique loop design that ensures low VSWR across an expanded frequency range, making it an ideal choice for use with SE4 series receivers.
Manual & Datasheet
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- Operating Frequency Range: 730–930 MHz
- Gain: 2.0 ± 0.5 dBi
- Voltage Standing Wave Ratio (VSWR): ≤ 1.5
- Polarization Type: Linear
- Impedance: 50 Ohm
- Max Input Power: 20 W
- Radiation Pattern: Omnidirectional
- Vertical Beamwidth (HPBW): ~65°
- Radiator Length: 365 mm
- Radiator Material: Brass wire (Ø 2 mm)
- Mounting Material: Molded plastic
- Cable (Feeder) Length: 150 mm
- Operating Temperature Range: -40 °C to +70 °C
- Connector Type: IPEX1 (U.FL)
- Weight: 19 g
This product is often purchased with
-
486₴ Add to cartFT K5 2000–2700 MHz Drone Control Antenna
FT K5 broadband control antenna (2000–2700 MHz) with linear polarization for FPV systems, ELRS, and Gemini. Provides 2.0 ± 0.5 dBi gain and 50 Ohm impedance. Radiator length: 158 mm, weight: 7 g. -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware. -
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU. -
3 417₴ Add to cartFT VTX 2.7GHz 4W 16CH SMA Video Transmitter
FT VTX 2.7GHz FPV video transmitter featuring 16 channels and up to 4W of power. Supports the IRC Tramp protocol, 7–36V input, active cooling, and comes equipped with an SMA Female connector.
We are always open for new partnerships!
Write to us and we will reply as soon as possible.



