Description
The FT F722 PRO HV2 flight controller is an updated version based on the STM32F722RET6 MCU with a frequency of up to 216 MHz, equipped with two BMI270 gyroscopes and designed for an input voltage of 3–8S (12–36V). Among the new features of the FT F722 PRO HV2 is the Camera Switch function, which allows you to connect up to three analog cameras and switch between them directly in flight using the radio transmitter.
The FC F722 PRO HV2 has two built-in BECs: 12V / 3A and 5V / 3A. A separate 4.5V BEC output is provided, which works when powered by either a battery or USB for compatible peripherals. An LC filter is used to protect against power supply noise, an AT7456E OSD chip is responsible for overlaying flight information onto analog video, and a DPS368 barometer is built in to estimate altitude. The built-in 16MB Blackbox memory is used to record flight data.
8 signal pads with DSHOT and PWM support can be used to control motors or servos. There are also 5 UART ports, 1 I2C port, SBUS, and a BZ- pad for connecting an ESC, ELRS receiver, analog or digital VTX, GPS module, and other peripherals. The F722 PRO HV2 flight controller has 4 mm mounting holes with a 30.5 × 30.5 mm pattern. The board size is 36.5 × 37 × 5.3 mm.
Wiring Diagram
Package Contents
User Manual
Firmware File
Target File
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- MCU: STM32F722RET6 (up to 216 MHz)
- Gyroscope: 2 × ICM-42688-P (BMI270) or equivalent
- Barometer: DPS368
- OSD Chip: AT7456E (CVBS OSD)
- Blackbox Memory: 16 MB
- Input Voltage: 3–8S (12–36V)
- BEC: 5V / 3A, 12V / 3A, 4.5V
- Camera Switch (CAM switch): CAM1 / CAM2 / CAM3
- Ports: 8 × PWM / 5 × UART / 1 × I2C / 2 × ADC (V-BATT / CURR-ESC) / SBUS / Buzzer (BZ-)
- LC Filter: for power supply noise protection
- Mounting Pattern: 30.5 × 30.5 mm
- Hole Diameter: 4 mm (for M3 dampeners)
- Dimensions: 36.5 × 37 × 5.3 mm
- Weight: 11 g
FT F722 PRO HV2 3–8S Flight Controller
The FT F722 PRO HV2 3–8S flight controller is based on the STM32F722RET6 MCU with a frequency of up to 216 MHz and two BMI270 gyroscopes. Designed for 3–8S power. Unlike the previous PRO HV version, this device supports connecting up to three analog cameras with the ability to switch between them, and also features an additional 4.5V BEC for compatible peripherals.
Manufacturer: FT2 532₴
In stock > 1000 pcs.
Description
The FT F722 PRO HV2 flight controller is an updated version based on the STM32F722RET6 MCU with a frequency of up to 216 MHz, equipped with two BMI270 gyroscopes and designed for an input voltage of 3–8S (12–36V). Among the new features of the FT F722 PRO HV2 is the Camera Switch function, which allows you to connect up to three analog cameras and switch between them directly in flight using the radio transmitter.
The FC F722 PRO HV2 has two built-in BECs: 12V / 3A and 5V / 3A. A separate 4.5V BEC output is provided, which works when powered by either a battery or USB for compatible peripherals. An LC filter is used to protect against power supply noise, an AT7456E OSD chip is responsible for overlaying flight information onto analog video, and a DPS368 barometer is built in to estimate altitude. The built-in 16MB Blackbox memory is used to record flight data.
8 signal pads with DSHOT and PWM support can be used to control motors or servos. There are also 5 UART ports, 1 I2C port, SBUS, and a BZ- pad for connecting an ESC, ELRS receiver, analog or digital VTX, GPS module, and other peripherals. The F722 PRO HV2 flight controller has 4 mm mounting holes with a 30.5 × 30.5 mm pattern. The board size is 36.5 × 37 × 5.3 mm.
Wiring Diagram
Package Contents
User Manual
Firmware File
Target File
For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.
Technical characteristics
- MCU: STM32F722RET6 (up to 216 MHz)
- Gyroscope: 2 × ICM-42688-P (BMI270) or equivalent
- Barometer: DPS368
- OSD Chip: AT7456E (CVBS OSD)
- Blackbox Memory: 16 MB
- Input Voltage: 3–8S (12–36V)
- BEC: 5V / 3A, 12V / 3A, 4.5V
- Camera Switch (CAM switch): CAM1 / CAM2 / CAM3
- Ports: 8 × PWM / 5 × UART / 1 × I2C / 2 × ADC (V-BATT / CURR-ESC) / SBUS / Buzzer (BZ-)
- LC Filter: for power supply noise protection
- Mounting Pattern: 30.5 × 30.5 mm
- Hole Diameter: 4 mm (for M3 dampeners)
- Dimensions: 36.5 × 37 × 5.3 mm
- Weight: 11 g
Discounts are applied automatically at checkout
| Quantity | Price per unit |
|---|---|
| From 10 to 99 | 2 456₴ |
| From 100 to 999 | 2 405₴ |
This product is often purchased with
-
1 927₴ Add to cartFT ELRS SE4 Dual Band Gemini ExpressLRS Receiver
FT SE4 dual-band ELRS receiver powered by Semtech LR1121 transceivers, supporting Dual Band (150–1000 MHz and 1000–3000 MHz) for Gemini and Xrossband setups. Features support for up to 4 antennas, 2 × 100 mW telemetry power, and an ESP32-C3 MCU. -
1 148₴ Add to cartKHARAK 7” 320mm Carbon Fiber FPV Drone Frame
The KHARAK 320mm carbon fiber frame is designed for 7-inch FPV drone builds. The construction features durable 6mm thick carbon arms. The frame is compatible with flight stacks supporting 30.5 × 30.5 mm and 20 × 20 mm mounting patterns. -
3 417₴ Add to cartFT VTX 2.7GHz 4W 16CH SMA Video Transmitter
FT VTX 2.7GHz FPV video transmitter featuring 16 channels and up to 4W of power. Supports the IRC Tramp protocol, 7–36V input, active cooling, and comes equipped with an SMA Female connector. -
944₴ Add to cartBrushless Motor for FPV Drone FT 2812 1900KV 6S
The FT 2812 1900KV motor, featuring a Ø33.3 × 36 mm rotor and a peak power of up to 2265.8 W, is designed for builds with 7–8 inch propellers on 6S power. The tall stator provides the necessary torque, while the 1900KV rating ensures maximum speed and instant acceleration. The motor is perfectly suited for specialized 7" FPV setups, high-speed… -
3 077₴ Add to cartFT ESC 65A 4-in-1 3-6S (32-bit) Speed Controller
The FT ESC 65A 4-in-1 speed controller is designed for drones with a 3–6S power supply. The board features 4 channels with a rated continuous current of up to 65A each. It is powered by a 32-bit microcontroller and uses AM32 firmware.
