FT VRX 3.3GHz 16CH Video Receiver

FT VRX 3.3GHz 16CH is an FPV video receiver operating in the 3170–3470 MHz frequency band, divided into 16 channels for flexible frequency selection within the operating range. Control via the I2C interface requires a compatible microcontroller and custom software, while a convenient and intuitive control method is available using the FT VRX Dock station.

The receiver sensitivity is -95 dBm (± 2 dBm), allowing the device to perform reliably with relatively weak input signals. The maximum input power is 10 dBm. A bandpass frequency filter of 2720–3570 MHz provides precise signal filtering, suppressing unwanted frequencies outside the operating band and enhancing reception selectivity.

The 3G3 video receiver outputs an analog video signal with an amplitude of 1 Vp-p. Antenna connection is made via an SMA connector, either directly or using a feeder cable. The module is powered by a voltage source of 4.5–5.5 V, with a current consumption of approximately 0.45 A. The receiver features compact overall dimensions of 58 × 27 × 25 mm for convenient installation in ground stations and repeaters.

Channel and Band Table

ESP32-C3 Wiring Diagram Example

For orders of 1000+ units, pricing is negotiated individually. Please contact us for a custom quote.

• Frequency Range: 3170–3470 MHz
• Bandpass Filter: 2720–3570 MHz
• Receiver Sensitivity: -95 dBm (± 2 dBm)
• Max Input Power: 10 dBm
• Number of Channels: 16
• Input Impedance: 50 Ohm
• Video Signal Amplitude: 1 Vp-p
• Control Interface: I2C
• Input Voltage: 4.5–5.5 V
• Current Consumption: 0.45 A
• Operating Temperature: -20 to +75 °C
• Storage Temperature: -40 to +90 °C
• Humidity Tolerance: 10–95 %
• Dimensions: 58 × 27 × 25 mm
• Antenna Connector: SMA Female
• Weight: 14 g